Following are Some of the Winding Package Defects which will result in complaints
Yarn Waste in the Cones
This is due to loose yarn ends that are wound on to the cone
Stitch, Drop Over, Web
Yarn is visible on the small or on the big side of the cone either across the side , around the tube, or going back in the cone
Damaged Edges or Broken Ends on the Cone
The yarn is broken on the edges or in the middle of the cone.
Ring Formation
The yarn runs in belt formation on to the package, because it is misguided
Without Transfer Tail
The desired transfer tail is missing or too short
Ribbon Formation
Pattern or ring formation are made by the drum when rpm are staying the same
Displaced Yarn Layers
yarn layers are disturbed and are sliding towards the small diameter of the cone
Misguided Yarn
The yarn is not equally guided over the hole package
Cauliflower
On the smaller side of the package, the yarn shows a wrinkle effect
Soft and Hard Yarn Layer
Some layer of yarn are pushed out on the small side of the cone
Soft and Hard Cones
Great difference in package density from one winder head to another